Product Description:
EZ400 PRO Diagnosis System
EZ400 PRO is a high-end and new style auto diagnostic device developed by XTOOL based on Android system. Its open source Android operating system provides fast boot-up and multitasking. EZ400 PRO provides extensive vehicle coverage for most US, Asian and European makes, which makes it the best solution for workshops.
XTOOL EZ400 Pro Features
- Easy registration with EZ400 PRO connected to WIFI
- Wireless diagnosis via Bluetooth
- One-click software update via WIFI
- Remote access
- Diagnosis reports in PDF file
- Record and playback live data
- 7 inch multi-touch screen
- On-board battery
- Extensive vehicle coverage for most US, Asian and European vehicle make
Precautions Before Use
- 1. The vehicle power supply has to meet the normal voltage limits DC4.8V---5
- 2. When pull and plug test wire harness, users should pinch the front-end of the wire harness to pull and plug, not pull the middle section of the wire harness. Users should check the corresponding direction of the port and plug in horizontally when they plug the wire harness, instead of inserting in an oblique way, which may damage the terminal.
- 3. When taking some special functions tests, users are required to operate the device according to operating instructions. For vehicle, it has to strictly meet the requirements, for example, the conditions that some vehicle models need to be reached are as follows: engine temperature 80ºC/105ºC, turn off the loads (such as headlights, air-conditioner, etc.), put accelerator pedal in released position, etc.
- 4. The ECU for Chinese domestic vehicle models are relatively disorderly, so when users meet conditions, such as the car can not be tested or the test data is wrong, they should consider whether the selected menu corresponds to the tested electronic control system, or they can find the car ECU and select the right menu according to the model number on the ECU label.
- 5. If users can not find the tested vehicle model or electronic control system in EZ400PRO test menu, they may need to update the software or consult Xtool technical service department
- 6. Banned to have connection test by using harness not from Xtool to avoid unnecessary losses.
- 7. Banned to power off directly in the communication between EZ400PRO and vehicle. Users should cancel the task and return to the main interface, then power off.
- 8. The device should be put and lifted slightly to avoid collision when using EZ400PRO. When click the screen, touch it gently to guarantee the service life of the touch screen.
- 9. During long period of non-use, please disconnect the power and turn it off.
Different vehicles have slight different menus.
Common main function menu includes the following options:
Read ECU: this function is to read ECU version information, which is the equivalent of "System Identification" or "System Information" in some electronic control systems, all mean to read ECU related software and hardware versions, models and production date of diesel engine, part number, etc. It is convenient for us to make record in the maintenance process, and it also makes later date feedback and management easier.
Read DTCs: read trouble codes stored in ECU.
Clear DTCs: clear current and historical trouble codes memory in ECU, under the premise that all the troubles are eliminated. The trouble codes can not be erased without eliminating all the troubles, which will cause the diagnostic tool always reading the trouble code because the code will always be saved in ECU.
Suggestion: users should better not to clear trouble codes, we need record the trouble details after reading code, which is provided as reference for maintenance. After dealing with troubles, there will be no trouble code when we re-read.
Read Live Data: that is to read the parameters of running engine, such as oil pressure, temperature, engine speed, fuel oil temperature, coolant temperature, intake air temperature, etc. Based on these parameters, we can judge directly where the problem lies, which helps to narrow the scope in maintenance. For some vehicles, during their actual operation, the problems such as performance characteristics offset, sensitivity reduction, can be judged in live data. This function needs us very familiar with engine parameters, for instance, when idle speed is 800RPM or 750RPM, coolant operating temperature is between 80~105ºC, what are the operating voltage and time of each sensor and actuator?
Special Functions: depends on vehicle models.
Actuation/Ative/ Components Test: mainly to judge whether these actuating components of engine are working properly.
Settings
Select enter Settings; users can set the language, unit and other system related options:
Languages: select the language. Please tick the needed option from multi-language options on the right.
EZ400PRO Technical Parameters
Operating System: Android
Processor:Quad-core 1.6GHz Processor
Memory: 1G RAM,16G FLASH
Display: 7.0 inch touch screen with 1024×600 resolution
Sensors: Gravity Sensor,Ambient Light Sensor
Audio Input/Output: Microphone, Dual Speakers, 4-Band 3.5 mm stereo/standard headset jack
Power and Battery: 4000mAh, 3.7V lithium-polymer battery
Power Voltage: 5V
Power Consumption: 8W
Operating Temperature: -20 to 50ºC(-4 to 126ºF)
Humidity: <90%
Dimension (L*W*H): 218*150*29mm
VIKTEC Products Range:
Our Partners:
Viktec Company Introduction:
Ningbo Dicong Machinery Co.,Ltd with VIKTEC a s its registered brands, is a manufacturer and exporter of automotive specialty tools,precision shafts and some unique air tools. We also offer the service of design and develop all possible tools for daily life use.
Having been involved in OEM and ODM tools' business for more than 20 years. We now have stable customers in USA,Europe,Australia,South America,etc. We ensure customers of both quality products and back-up service.
We work in a very serious way at each stage of manufacturing, quality control and packaging. Our clients enjoy the business with us always.We have been developing new products at each quarter of year to follow up the industry market and make our customers happy. This is the main reason why our company keeps a good status in exports.
Most important of all, we are the most complete, competent and knowledgeable automotive specialty tools' supplier in China. We are young and energetic to offer you excellent service.
Our Quality Control and Certificate:
Why Choose Us:
·More than 21 years experiences on designing, manufacturing and exporting in specialty tools.
·Reasonable price from factory's supplying directly.
·OEM color, label, manual and package are Welcomed.
·R&D team is qualified to do customized project for OEM orders.
·Standard products in stock ensure the punctual delivery time.
·Inspection is carried out all through the production process.
·Export sales team is professional to serve customers, quick respond and excellent after-sales.
·Convenient transportation, 1 hour by truck shipped to Ningbo port.
·Complianced with "CE", "Reach","TUV" Management with "ISO9001:2008"
FAQ:
.Are you factory ? Can you export the goods directly ?
-Yes. We are trading and manufacturing company,we can export the goods by ourselves.
.What do you do?
- Our products mainly include: automotive specialty tools like engine tools,timing tools, under car tools, brake tools, air condition tools, special sockets,compression testers,precision shafts and some unique air tools, etc...
.How to control the quality?
-Full inspect on assemble line by professional machine. Finished product and packaging inspection
.Can you do OEM for us ?
- OEM are welcome for us. Customers' brand, logo, label can be customized for the products and carton package, but based on a certain quantity.
.Can you help us to do some change about your product?
- Yes, special drawing and design will be evaluated by our technical department, unit cost will be calculated by finance department for your final confirmation. All procedures will be informed and confirmed with you in advance.
.Can I get a free sample?
- Yes, samples are free. But express cost is on buyer's account.
Shipping ways: EMS, DHL, FedEx, UPS, TNT, China Post.
.What is the trade terms and payment terms?
-Trade terms: FOB &CIF ,C&F . Payment term : T/T , 30% as deposit , 70% before shipping.
.How about the time of delivery ?
-Honestly, it depends on the order quantity and the season you place the order.Normally,the delivery will be around 15-25 days.
Factory Show:
VIKTEC Customized Package Service:
Viktec could offer different type of the customized package according to your requirement.
Welcome to send your enquiry. Viktec will try our best to reply each enquiry within 24 hours.
Thank you so much for your support and choose Viktec Tools.
Audited Supplier 
){kind=link}
){kind=link}